China Custom Tractor Pto Drive 3 Point Linkage Grass Cutter Small Tractor Mulcher Flail Mower for Sale with Great quality

Product Description

Product Description

Product Parameters

Models Working Width (mm) PTO Input Speed (rpm) Hammer Blades (N.) -Y- Grass Rotor Required Shipped Overall
Blades Speed HP Weight Dimensions
(N.) (rpm) (hp) (kg) (mm)
AGL120 1150 540 18 36 2160 35-60 303 1350*800*750
AGL140 1350 540 22 44 2160 40-70 318 1550*800*750
AGL160 1550 540 24 48 2160 45-80 336 1750*800*750
AGL180 1750 540 28 56 2160 60-90 355 1950*800*750

 

Detailed Description

All-in-1 machine (AGL) product introduction

I. Functions:
1. Return the grass to the field
2. Broken branches return to the field
3. Return the broken straw to the field
4. Slope canal slope operation
5. Inline vertical operation 6. Orchard operation, can be placed to the tree grass, do not hurt the cloth A modern integrated management machine designed for large and medium-sized sites of more than 5 mu that can complete the operation of handle, trunk and other obstacles.Equipped with high-power transmission, high-strength suspension and high-strength hammer claw, with a variety of models available, including 1.2 meters, 1.4 meters, 1.6 meters and 1.8 meters, suitable for 1.2 meters to 6 meters of line spacing.Equipped with tractors above 30 horsepower can be used.Can easily adjust the stubble height, the range of 2-5 cm, and can be customized.Operation does not hurt the ground cloth, drip irrigation belt, with a number of operation safety protection mechanism, can be adjusted and balanced.Whether we use maintenance or operation safety, we have given a comprehensive consideration in the design. The application of raw grass technology is conducive to soil moisture conservation, reduce diseases and insect pests, and improve the content of soil organic matter.At the same time, it is also conducive to earthworm reproduction, to increase soil permeability and improve soil mass structure through grass roots and earthworm.More help to reduce the application of chemical fertilizer, to avoid soil acid and base imbalance and hardening.
II. Product Advantages:
Can complete a higher coverage rate of broken grass, broken wood, broken branch operations.Adjustable hydraulic offset and flip, change the mowing position, allow to reach under the branches, into the ditch, under the fence, on the bank of the pond, in the canal slope and any other tractor is not suitable for or cannot drive safely, operation without injury ground cloth, drip irrigation belt, etc.
The operation of oneself is convenient.Use the standard hydraulic system without modifying the tractor. Overall operating cost is low.Machine structure design is simple, easy to maintain; directly crushed back to the field, natural fermentation into organic fertilizer, reduce labor costs; can complete 100-200 mu / day operation, improve the work efficiency.
The edge of the whole machine shell is streamlined design to avoid scraping off the fruit when touching the fruit branch, with a beautiful shape.
Safety protection are designed, including pulley protection cover, beyond clutch, drive shaft shear pin and hammer claw baffle to prevent the blade from throwing out.
Iii. Scope of application
Canal slope with an inclination of less than 53°.
Orchard implementation of orchard grass, natural grass of all kinds of orchards.
Organic ecological park, fruit demonstration park, horticultural standardization garden and sightseeing picking garden. Fruit professional cooperatives, forestry and fruit technical service team to provide production services to the members. All kinds of ecological grass without herbicide, without clear tillage method, natural agriculture and forestry parks. Municipal, garden, nursery, hedges, both sides of roads and solar power station mowing maintenance.

 

Packing & Shipping

Company Profile

ZheJiang Jitian International Trade Co., LTD, a wholly-owned subsidiary of ZheJiang Jitian Agricultural Machinery Group Co., Ltd was established in 2571 and is located in HangZhou, ZheJiang province, enjoying convenient transportation and beautiful environment. Our company covers an area of 12,000 square meters and has 80 employees. We are specialized in the supply of agricultural machinery and its accessories.

 

FAQ

 

1. Who are we?
We are based in ZheJiang , China, start from 2571,sell to Southeast Asia(30.00%),Africa(30.00%),Eastern Asia(15.00%),North
America(10.00%),South Asia(10.00%),Mid East(5.00%). There are total about 11-50 people in our office.
 

2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.What can you buy from us?
Tractor,Generator Set,Diesel Engine,Feed Machinery,Reel Irrigation

4. Why should you buy from us not from other suppliers?
Member of China Agricultural Machinery Circulation Association, Member of ZheJiang Agricultural Machinery Circulation Association,
China Agricultural Machinery Circulation and Marketing First-Class Enterprise.

5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian

 

Tips For Maintaining Your Tractor Parts

In this article, we’ll cover some important tips for maintaining your tractor parts. Read on to learn about clutches and CZPT fittings. We’ll also discuss what tractor parts need to be repaired and how to ensure your equipment stays up and running for years. Also, we’ll discuss preventative maintenance and how to choose the right tractor parts company. This will ensure you’ll never have to replace your parts if you experience a problem.

agriculturalparts

Maintenance of tractor parts

If you own a tractor, then you know how important it is to maintain it properly. You should service it at least once a year or whenever you notice that the tractor has issues. Typically, these issues will include a struggling engine or battery, reduced power, and oil leaks. During a service, you should make sure that all the fluids are at their proper levels and replace worn parts as needed. Ideally, you should have a maintenance checklist for tractor parts, so you can refer to it whenever you have a problem.

It is also important to grease exposed fittings on your tractor. You can purchase lithium-based grease from automotive parts stores, or you can get universal ones that come in aerosol cans. Always remember to properly torque nuts and bolts before putting them back on. If you fail to do this, the parts may become loose and start vibrating. Ensure that these components are greased properly so they don’t become loose and cause problems later on.

If you are using a tractor outdoors, it is important to maintain the tractor’s batteries. This will help protect it from rust and corrosion, both of which can shorten the life of your battery. You can also use a baking soda solution to clean the battery, as it is safe to use. The battery terminals should be clear of obstructions and be inspected frequently. You should also turn off the tractor’s ignition before working on the battery or disconnected lead-acid batteries.

Regularly replace your tractor’s 12 volt battery. A battery is essential for tractor operation, as without it, the starter/generator will not work. Also, make sure to purchase the correct 1 for your tractor model. You should also check the belts on your tractor. If there is any loose bolt or component, you should replace it. Also, make sure to remove any straps or chains that are holding the battery. After replacing the belts, store the tractor’s battery in an area with good climate control. A battery maintainer can be purchased at any auto parts store.

agriculturalparts

Types of tractor clutches

Different types of tractor clutches perform different tasks. For example, single-plate clutches can disengage a tractor’s PTO when the engine is off. On the other hand, sequential clutches can disengage both the wheel drive clutch and the PTO clutch. These types of tractor clutches are common in tractors that have between 15 and 100 horsepower. This article will discuss the differences between these clutches and their functions.

Single-plate clutches are the most common type of tractor clutch. They transfer torque by friction between a clutch plate and the engine’s input shaft. A single-plate clutch has a single plate that is mounted on the clutch shaft. A single-plate clutch has a conical friction surface on each side. When the clutch pedal is pressed, the male cone slides into contact with the female cone. When the clutch pedal is released, the male cone slides away from the engine shaft.

Another type of tractor clutch is the diaphragm clutch. These use less rigid springs to transmit power to the tractor’s wheels. Diaphragm clutches are the same as conventional clutches, except that the lever does not apply pressure to the pressure plate. Both clutches are important to tractor performance and safety. They help farmers make quick turns and help move tractors. Tractors’ diaphragm clutches have inspired many video games.

Modern tractors offer many different types of drivetrains. Here, we compare the advantages of each type. The original drive system relied primarily on the clutch to shift gears and change range. Additionally, it relies on a clutch to engage/disengage the PTO drive. A partial depression stops all drives, while a full depression only stops the transmission. In contrast, modern tractors have independent PTO drives that are independent of the gearbox.

CZPT Accessories

CZPT accessories are available for many tractor parts. These are typically used where grease is required, such as ball joints and universal joints. They are also common on hard surfaces that slide on, such as on a wheelbarrow. You can find them in many places, including on old tractors. To properly lubricate these parts, you should use an electric or cordless grease gun. Both are more expensive than the $10 mini pistol grips, but they help reduce hand fatigue and make maintenance easier.

If you cannot find a CZPT fitting, try a grease fitting tool or fitting activator. These are used to loosen stuck bearings. The tool works by filling it with grease or diesel and hitting it with a hammer to release it. However, investing in a regenerator of the right quality – cheap will do little to help. You can also purchase replacement CZPT accessories in various sizes to replace damaged accessories.

If not cleaned properly, grease can damage moving parts. The rag will help you remove oil from your nipples. Excessive lubrication can cause rust. In addition to damaging moving parts, grease attracts dust, sand and grime. Therefore, it is important to keep CZPT fittings clean and free of grease. If you can’t clean them properly, you can use a grease gun to apply it to the CZPT accessories.

A grease gun can also be a handy tool on your farm. When you need to lubricate tractor parts, grease accessories can help you do just that. If you don’t have a grease gun, consider buying a CZPT with a grease gun. It can make your life easier and keep your parts running smoothly. You can also save a lot of time and money by lubricating parts.

agriculturalparts

Preventive Maintenance

Preventive maintenance of tractor components is critical to maintaining efficiency. Regular tractor maintenance reduces unplanned downtime, increases efficiency and minimizes repair costs. As a tractor owner, it is important to understand and follow the manufacturer’s recommended maintenance procedures for various parts. Read the owner’s manual for the most common problems that can affect your tractor. Preventive maintenance can prevent unexpected costs during the workday or in the field.

A preventative maintenance program should include operator training. Operators must know how to perform routine maintenance tasks and how to complete them properly without fail. Operator training can include a review of the operator’s manual, demonstrations of system controls, and testing of equipment and parts. Operator training can also include creating checklists of minor maintenance tasks to help operators maintain machines properly. This can also reduce the need for emergency repairs or rushed parts shipments.

Proper lubrication and regular inspection of tractor parts are essential to keep your tractor in good condition. Lubrication will keep internal parts from rust and other debris from causing damage. Additionally, tractor owners should regularly change their oil and change oil filters. This will help protect your engine and reduce friction. You can also visit your local dealer for checkups. Finally, clean the air filters, as dust and other particles in the air can cause serious damage to your tractor.

If you live in a cold climate, preventative maintenance on tractor parts is vital to keeping your tractor in peak condition for the winter months. Winter-grade fuel and oil are essential for keeping your tractor running smoothly and efficiently during the cold season. Remember to follow your owner’s manual when it comes to fuel, as fuel that is not appropriate for your climate can clog the filter and cause a breakdown. By following these guidelines, you can ensure that your tractor runs optimally all winter long.

China Custom Tractor Pto Drive 3 Point Linkage Grass Cutter Small Tractor Mulcher Flail Mower for Sale     with Great qualityChina Custom Tractor Pto Drive 3 Point Linkage Grass Cutter Small Tractor Mulcher Flail Mower for Sale     with Great quality